field_job_employment_type

field_job_occupational_field_parents_all

job_organization_name

Title: Journeyman Pipefitter Location: Jacksonville, FL, 32257, USA USA Category: Field ID: JOURN001072 Description: Stellar is seeking Pipefitters to plan, lay-out, position and align fabricated parts of mechanical, structural, and miscellaneous assemblies. You will install, test and repair all types of pipe and similar tubular products in accordance with all applicable plans, specifications, codes, and industry standards as well as perform other crafts at levels appropriate to training and skills as requested by supervision. Must be familiar with HVAC systems, plumbing systems and industrial plant utilities utilizing boiler systems, steam piping, compressed air systems, hot and cold water piping systems, and other process systems. <ul><li>Regarding the portion of the work assigned, develop complete understanding of design plans and specifications</li><li>Plan, lay-out, install and/or repair all types of pipe and/or similar tubular products in accordance with those plans and specifications</li><li>Read and understand design documents, including isometric and orthographic drawings. Visualize two dimensional drawings in three dimensions</li><li>Use appropriate hand and power tools to properly measure, cut, assemble, and install all types of pipe and/or similar tubular products</li><li>Install supports, valves and other control equipment</li><li>Test installed piping systems and install all other related items in accordance with the applicable plans and specifications</li><li>Bolt, clamp or tack-weld parts to secure in position for final welding</li><li>Utilize all pipe fitting techniques and methods for different types of piping systems and pipe couplings including butt welded, socket welded, threaded, Victaulic, grooved, glued and fused joints</li><li>Understand and implement lockout/tagout procedures in a safe manner</li><li>Follow established job-site safety and regulations and maintain a safe and clean work area</li><li>Identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards</li><li>Inspect subordinate's work for compliance with the contract plans and specifications, point out deficiencies and explain, and take any corrective action needed</li><li>Install all other items in accordance with the applicable plans and specifications</li><li>Produce quality work, meeting requirements of plans, specifications and industry standards</li><li>Perform all other job-related duties as requested by supervisor</li></ul> Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. <ul><li>Employee will be required to wear personal protective equipment as needed to perform job tasks</li><li>Employee is regularly exposed to noise, dust, and varying types of smells</li><li>Employee is frequently exposed to moving mechanical parts, fumes or airborne particles; must be able to properly use and handle toxic or caustic chemicals</li><li>Employee is regularly exposed to wet and/or humid conditions, elevated work areas, and outside weather conditions</li><li>Employee is expected to work in a safe and efficient manner while maintaining a clean work area</li><li>Employee is expected to comply with Stellar, client, and OSHA safety requirements while traveling</li></ul> Expected Hours of Work <ul><li>Days and hours of work are typically Monday through Saturday, 7:00 a.m. to 5:30 p.m. primarily during day shift</li><li>Scheduling requirements may routinely require work seven days a week and some periodic second shift hours</li><li>Certain portions of projects may require work up to 16 hours per day for several consecutive days</li></ul> Travel Anticipated 100% travel for this position. Locations vary throughout the United States. Qualifications <ul><li>Education: High School Diploma (or GED or High School Equivalence Certificate)</li><li>Experience: Minimum 3 years' experience as a pipefitter </li><li>NCCER Certification as Industrial Pipefitter preferred</li><li>Six months Vocational school training preferred</li><li>Must pass the prescribed Stellar pipefitter test</li><li>Must be able to add, subtract, multiply and divide whole numbers and fractions rapidly and accurately.</li><li>Communication Skills - Comprehend documents such as safety rules, operating maintenance instructions, and procedure manuals. The ability to understand information, ideas, direction and then be able to perform the task or project discussed. Also, to be able to ask questions to insure you understand the information given.</li><li>Must have a working knowledge of pipefitting techniques and methods</li><li>Must be able to layout mechanical equipment according to design and plans, and assist with installation</li><li>Must be able to work with carbon steel, stainless steel, PVC, poly/HDPE, copper, and various high pressure/temperature alloys</li><li>Must be proficient in the use of bevelers, threaders and other end prep machines.</li><li>Must be familiar with steam/condensate, HVAC and other process systems</li><li>Must be able to operate mechanically powered lifting equipment for both personnel and materials as trained</li></ul> Expectations <ul><li>Technical capacity for industrial systems and piping</li><li>Problem Solving/Analysis</li><li>Good written and communication skills</li><li>Ability to work well within a collaborative, team atmosphere</li><li>Maintains a thorough working knowledge of and adheres to organization/project policies, regulations and procedures</li><li>Accountable for quality of own work and delegated work</li><li>Well organized</li><li>Good forward planner</li><li>Works well under pressure</li><li>Ability to present ideas effectively</li><li>Completion of Stellar safety training within 2 weeks of employment and then annually thereafter</li><li>Understand and implement hot work permits and lockout/tagout procedures in a safe manner</li><li>Develop weld maps, isometric drawings, as-built records, and other documentation of system installation</li></ul> Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. <ul><li>Ability to perform repetitive movements</li><li>Ability to work overhead</li><li>Ability to use hands to grasp</li><li>Ability to reach with arms</li><li>Ability to stand, walk, stoop, kneel, squat, crawl, and twist</li><li>Ability to sit, climb and balance</li><li>Ability to move in and around confined and cluttered places and uneven areas. Full range of motion and flexibility consistent with age.</li><li>Ability to work up to 12-hour shift in all weather and temperature extremes</li><li>Ability to frequently lift and/or push or pull up to 25 pounds and occasionally lift and/or push or pull up to 50 pounds</li><li>Adequate vision to perform all required tasks</li><li>Ability to work over 5 feet above the ground; must not have a fear of heights</li><li>Participate in respiratory fit testing and use as required</li></ul> Special Licenses and/or Certificates: <ul><li>OSHA 10-hour certification preferred</li></ul> About Stellar: Stellar offers a comprehensive package which includes: <ul><li>Competitive pay based on experience</li><li>Remote &amp; hybrid work options for many positions</li><li>Paid Time Off - accrue 15 days (120 hours) within first year of service</li><li>Paid holidays</li><li>Medical, dental, and vision insurance options</li><li>Tax-advantaged accounts (HSA, FSA, Dependent Care FSA)</li><li>Company-paid life and disability insurance</li><li>401(k) - company match with immediate vesting</li></ul> Stellar, headquartered in Jacksonville, FL, is a fully integrated firm focusing on design, construction, architecture, engineering, and mechanical services worldwide for over 30 years. Stellar combines a multitude of capabilities to create buildings and systems of exceptional long-term quality, value and efficiency. From food processing plants and healthcare facilities to refrigerated warehouses, automated production lines and beyond, we offer an integrated approach to meet all our clients' needs. Stellar is an Equal Opportunity Employer and does not discriminate against any applicants for employment based on their race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, physical or mental disability, genetic information, veteran status, uniformed servicemember status, or any other status protected by law. PI243807190

Journeyman Pipefitter

CURRENT EMPLOYEES - Please apply using "Jobs Hub" in Workday. This career site is for external applicants only. Employee Type: RegularOperates Dragline to mine Aggregate Limestone.Job Description: Title: Dragline Technician Location: Medley, FLReports to: Operations Supervisor Department: OperationsEssential Duties: <ul><li>Operates a dragline in all modes of digging, spoiling and propelling utilizing hand levers and foot pedals to rotate machine and position boom above excavation point; raises and lowers bucket to material; drags bucket forward to load material, rotates machine and lets bucket back out to dump.</li><li>Assists supervisor with maintaining consistent dig sequence and windrow placement.</li><li>Anticipates walking pad requirements and requests grading assistance to eliminate down time on the machine.</li><li>Inspects rope and predicts tooth changes.</li><li>Assist other crew members to maintain positive, engaged and safe work environment.</li><li>Performs job duties in accordance with MSHA law and regulations, established company safety procedures and State and Federal environmental regulations.</li></ul>Other Duties:<ul><li>Assists with all repair and component replacements.</li><li>At times, may be required to drive a company vehicle, must maintain a valid driving record (MVR) and in good standings.</li><li>Performs other duties as assigned.</li></ul>Knowledge, Skills, and Abilities:Prior demonstrated ability operating heavy equipment in a construction or mining environment. Ability to be trained in safe dragline operation, digging, spoiling and moving machine to maximize machine efficiency and reduce operating cost. Ability to work with other crew members and work as a team player is a must.Education, Training and Experience:Prior on-the-job experience as a heavy equipment operator is required. Ability to be trained in the safe operations of a dragline is a must. Minimum Requirements:<ul><li>Prior dragline operating experience a plus.</li><li>Clean MVR.</li><li>Ability to work rotating shifts.</li></ul> EEO Statement:EEO/M/F/disability/veteran You must meet at least the specific minimum requirements listed above to be considered a qualified applicant. With North American Mining, you’re not just getting a team with decades of successful mining projects under our belts. You’re getting a long-term partner that approaches each job with professionalism to provide experience-based solutions. Your goals are our goals, and we deliver reliable, consistent production. PI243797383

Dragline Technician

CURRENT EMPLOYEES - Please apply using "Jobs Hub" in Workday. This career site is for external applicants only. Employee Type: RegularRepairs electrical mining equipment and facilities.Job Description: Title: Electrician Location: Medley, FLReports to: Maintenance Supervisor Department: MaintenanceEssential Duties: <ul><li>Perform electrical inspections on mine equipment and record data in forms and books. </li><li>Read and understand parts books and manuals.</li><li>Work with low, medium, and high voltage electric systems safely.</li><li>Connect, disconnect, and switch high voltage power cables.</li><li>Perform troubleshooting on AC and DC circuits.</li><li>Perform job duties in accordance with MSHA law and regulations, established company safety procedures, state, and federal environmental regulations.</li><li>Use basic electrical test instruments.</li><li>Repair, maintain and troubleshooting of D.C. motors and controls on mining equipment.</li></ul>Knowledge, Skills, and Abilities:<ul><li>Fluency in English is preferred, Bi-lingual is a plus.</li><li>Know how to read and interpret technical manuals and instructions, and electrical prints and schematics.</li><li>Knowledge of National Electric Code, MSHA regulations.</li><li>Knowledge of basic electricity and theory.</li><li>Must drive a company vehicle and maintain a valid driving record (MVR) and in good standing.</li></ul>Education, Training and Experience:<ul><li>High School Diploma/GED</li><li>Electrical technical training in vocational school or equivalent experience.</li><li>Certification as MSHA certified Green Card Electrician or capability of obtaining certification.</li></ul>Minimum Requirements:<ul><li>Current certification as a MSHA “green card” electrician preferred.</li><li>Prior experience in low, medium and high voltage electric systems a plus.</li><li>Clean MVR.</li><li>Ability to work rotating shifts. </li></ul> EEO Statement:EEO/M/F/disability/veteran You must meet at least the specific minimum requirements listed above to be considered a qualified applicant. With North American Mining, you’re not just getting a team with decades of successful mining projects under our belts. You’re getting a long-term partner that approaches each job with professionalism to provide experience-based solutions. Your goals are our goals, and we deliver reliable, consistent production. PI243797267

Maintenance Technician - Electrician

Hyosung America, Inc Job Type: Full Time Location: MELBOURNE, FL, US OVERVIEW Nautilus Hyosung America, Inc. (HYOSUNG) is a world leader in ATM self-service technologies. We have built a reputation for innovation by continually researching, developing and delivering quality ATM products – flexible products that adapt to our changing world and our customers’ changing needs. JOB SUMMARY: The Field Service Technician will be responsible for responsible for the service and maintenance of Automated Teller Machines (ATMs) within their assigned territory. The Field Service Technician will provide on-site support for ATMs including but not limited to repair, maintenance and replacement services. The Field Service Technician may also participate in the training of other new NHA Field Service Technicians and assist with the staging and integration of ATMs. Some travel required. ESSENTIAL FUNCTIONS: <ul><li>Installation, repair, software loading and maintenance of ATM’s or other products in a defined geographically territory.</li><li>Train bank staff or vendors on required maintenance tasks of equipment.</li><li>Work with internal and external support departments required to provide maintenance support to the end user.</li><li>Maintain all Service Level Agreement as defined per customer contract.</li><li>Work on products and services of medium to high complexity.</li><li>Occasional travel with short notice to areas outside your home geography may be required where management deems necessary</li><li>Perform preventive maintenance functions of an ATM including diagnostics, testing and cleaning.</li><li>Manage spare parts and follow all inventory processes.</li><li>Complete administrative reports within time line allotted.</li><li>Complete tasks as assigned by supervisor or applicable NHA staff members.</li><li>Flexible work schedule with on-call duty.</li><li>Work independently with minimal supervision.</li><li>As a representative of NHA, provide an extraordinary customer service experience to our customers meeting their service obligation and demands.</li><li>Maintain company property in good working conditions.</li><li>Maintain a valid driver’s license.</li><li>Responsible with company credit card usage and expense reporting.</li><li>Must follow all security procedures and policies.</li><li>Other duties as assigned</li></ul> EDUCATION AND EXPERIENCE: <ul><li>Prior ATM experience is preferred, but not required, or 3-5 years of experience in field service.</li><li>Have solid understanding of electronics and electro-mechanical equipment operation.</li><li>Ability to use analog and digital voltmeters.</li><li>Ability to use hand tools and carry heavy parts up to 80 lbs.</li><li>Ability to work extended hours, including beyond assigned shift with no notice when required. </li><li>Ability to travel to other areas of the country if needed on occasion.</li><li>Ability to work all shifts which may include weekend and holidays.</li><li>On-Call duty required for all FSE positions. Compensation is provided for On-Call duty.</li></ul> We offer industry-leading benefits including: <ul><li>Company vehicle, gas card, phone, laptop, tool bag and corporate credit card provided</li><li>Two medical plans with employer funded HSA or HRA accounts to help cover your co-pays and deductibles</li><li>Multiple Flexible Spending account options</li><li>Comprehensive Dental including child and adult Orthodontia</li><li>Free Basic Life and Accidental Death/Dismemberment Insurance</li><li>Free Long Term and Short Term Disability Insurance</li><li>A fee free 401(k) retirement program with no waiting period or no vesting restrictions, company matches 50% up to 3% vested</li><li>Generous Vacation and Sick paid time off and flexible holiday schedule </li><li>And MUCH more!</li></ul> PHYSICAL DEMANDS: These physical demands are representative of the physical requirements necessary for an employee to successfully perform the essential functions of the job. Reasonable accommodation can be made to enable people with disabilities to perform the described essential functions. <ul><li>While performing the responsibilities of the job, the employee is required to talk and hear.</li><li>The employee is often required to sit and use their hands and fingers, to handle or feel.</li><li>The employee is frequently required to stand, walk, reach with arms and hands, climb or balance, and to stoop, kneel, crouch or crawl.</li><li>Employee must be able to lift 50 lbs without assistance. May be asked to lift up to 80 lbs with assistance of machinery or helper.</li><li>Vision abilities required to perform this job include close vision.</li></ul> WORK ENVIRONMENT: While performing the responsibilities of the job, these work environment characteristics are representative of the environment the job holder will encounter. Reasonable accommodations may be made to enable people with disabilities to perform the essential functions of the job. <ul><li>The employee may be occasionally exposed to moving mechanical parts and vehicles.</li><li>The noise level in the work environment is usually quiet to moderate.</li><li>The passage of employees through the work area is average and normal.</li><li>This position is a high-security position, and may pose a risk of exposure to criminal elements. Proper security training and awareness is required.</li></ul> Nautilus Hyosung America, Inc. recognizes and values the diversity of its employees, customers and business partners. Equal Opportunity Employer ~ Minorities/Females/Disabled/Veteran Field Service, Technician, ATM, Engineer, Mechanical, Automotive, Electrical, Computer, Customer service, Remote, Equipment PI244300408

ATM Technician (3738)

Position Title: Service Technician 2 Location: Mulberry, FL Requisition ID: JR_19520 Description: KSB is a leading supplier of pumps, valves and related service. Our reliable, high-efficiency products are used in applications wherever fluids need to be transported or shut off, covering everything from building services,industry and water transport to waste water treatment, power plant processes and mining. Founded in 1871 in Frankenthal, Germany, the company has a presence on all continents with its own sales and marketing organisations and manufacturing facilities. Around the globe, more than 190 service centres and around 3,500 service specialists are on hand to provide local inspection, servicing, maintenance and repair services under the KSB SupremeServ brand. Innovative technology that is the fruit of KSB's research and development activities forms the basis for the company's success. People. Passion. Performance. It is these three success factors that make KSB the company it is today. At KSB, we recognise that it is people who actually make the difference – the people we employ and the people we serve. This is why we are committed to equal rights and treatment worldwide and never lose sight of the aspects ecology and sustainability when manufacturing our products.Pump Mechanic IIKSB SupremeServ by KSB GIW, Inc.Department: SupremeServ Reports to: Service Center Operations Manager Location: Mulberry, FL, USA Shift: 1stFLSA Status: HourlyOVERVIEW:The Pump Mechanic will disassemble, clean, inspect, and rebuild customer assemblies and KSB GIW, Inc. re-manufactured assemblies in compliance with the Service Center's ISO procedures. Your job duties will take place at the Service Center, as well as in the field at customer sites when required. You will conduct work activities in a professional manner that reflects positively on the image of the company and conforms to current Health and Safety legislation, upholding KSB GIW Inc. Health and Safety Policies.RESPONSIBILITIES:<ul><li>Performs at a high standard in each area of responsibility, has tenacious and determined approach</li><li>Assists in operation and maintenance of equipment as required</li><li>Adheres to productivity metrics regarding efficiency</li><li>Reads and interprets engineering drawings, assembly drawings, OEM manuals, and assembly/disassembly procedures</li><li>Proficient in math calculations used for assembly</li><li>Ensures safe/correct lifting of parts in assembly</li><li>Monitors tool and equipment condition and maintenance status</li><li>Organizes and operates all assembly equipment as needed and instructed</li><li>Operates forklifts and cranes as needed</li><li>Familiar with all pump and bearing assembly parts</li><li>Ability to correctly use machine shop measurement instruments, including micrometers, indicators, and scales</li><li>Locates and retrieves parts for pump assemblies</li><li>Prepares/cleans assembly parts with solvents and cleaners</li><li>Assembles and tests units per procedures</li><li>Moves materials and castings throughout the plant as directed</li><li>Keeps organized records as instructed</li><li>Performs tactical and strategic problem solving</li><li>Assists in implementation of department goals</li><li>Responsible for housekeeping on the respective shift and work areas</li><li>Makes recommendation to supervisors and manager for improvements</li><li>Ensures proper supplies are readily available when needed</li><li>Compliant in all KSB GIW Inc. procedures</li><li>Notifies QC and appropriate persons on non-conforming products</li><li>Ability to work independently, prioritizing per customer demands</li><li>Able to make good, sound decisions – logical and analytical abilities welcomed</li><li>Proficient in all areas of Assembly</li><li>Ability to prepare and paint all parts and assemblies prior to shipment per procedures</li><li>Prepares all assemblies for safe shipment and handling per procedure</li><li>Disassembles pump units for failure analysis and tabulate condition reports</li><li>Inspects each individual pump component, documenting actual dimensions as received</li><li>Works with inventory controller to locate and label all units in warehouse</li><li>Operates drills, grinders, milling machines, lathes, and other equipment in the machine shop</li><li>Performs machine shop work as needed on customer rebuilds and remanufactured units</li><li>Ensures safe, correct setup of machine tool fixtures and parts</li><li>Understands GD&amp;T and engineering drawings</li><li>Basic welding and fabrication skills</li><li>Ability to train new employees</li><li>Other duties within the employee's capability that may be assigned by the Service Center Operations Manager</li></ul>QUALIFICATIONS:<ul><li>High School diploma or GED required, two (2) year technical degree in machining considered a plus</li><li>Minimum of 5-7 years of experience in mechanics, repair, and/or rotating equipment</li><li>Basic knowledge of vibration and laser alignment</li><li>Basic field service experience and willingness to travel for service calls, sometimes for extended periods of time</li><li>Knowledge of gearboxes, turbines, mixers, and compressors</li><li>Knowledge of suction pumps, single-stage pumps, multi-stage pumps, split casing pumps, and vertical turbine pumps</li><li>General machine shop knowledge</li><li>Must be able to work overtime on short notice when required</li><li>Able to use various types of hand and power tools</li><li>Able to use various types of precision measuring tools</li><li>Ability to read and interpret metric / imperial measuring units.</li><li>Willing to pursue further education and training as needed</li><li>Possesses good judgment and decision making skills</li><li>Promotes safety and housekeeping at all times</li><li>Adheres to Company guidelines, rules, and policies regarding attendance, punctuality and safety</li><li>Basic computer literacy</li></ul>PHYSICAL REQUIREMENTS<ul><li>Frequently: Standing, sitting, bending, squatting, kneeling, lifting, pushing, and pulling &lt;75 lbs.</li><li>Occasionally: overhead work, climbing ladders or stairs, driving forklifts, operating cranes</li><li>Must be able to wear a respirator</li></ul>KSB Group is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. KSB makes hiring decisions based solely on qualifications, merit, and business needs at the time. We value employees who take the initiative and are committed to our company; Employees who take responsibility and for whom business success is the focus of their actions. In return, we offer fair framework conditions for collective wages and pensions, flexible working time models, individual training opportunities and the best career prospects. PI244256605

Service Technician 2

Outside Machinist III Job ID: 2024-429 Date Posted: 2024-07-24T00:00:00 Location: Jacksonville, FL Minimum Experience: 5 years Education: High School Diploma or Equivalent Epsilon Systems is currently seeking a full-time Outside Machinist III in Mayport, FL.Summary: Repairs, modifies or overhauls various types of equipment or systems. Sets up and operates portable machining tools or equipment with constant supervision.Responsibilities:<ul><li>Reports directly to the Production Manager. Once assigned reports directly to the project Foreman in the performance of his/her responsibilities.</li><li>Strictly adheres to corporate, federal, state and local safety regulations prior to setting up or operating any machinery.</li><li>Ensures that all Epsilon Systems Mission Readiness Group Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded.</li><li>Strictly adheres to safety, quality standards. </li><li>Maintains good housekeeping practices; turning off machines when not in use, disposing of waste properly, sweeping the area, etc.</li><li>Ensures all tools listed on the Required Tools List are available for use within two weeks of your employment.</li><li>Ensures that all requirements of the Epsilon Systems Mission Readiness Group Quality Assurance Manual are followed when invoked by QA Workbook, Work Package (WP), Work Instructions (WI) and/or other guidance given by management.</li><li>Notifies Foreman of any unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.).</li><li>Follows detailed repair procedures and instructions (e.g.; QA Workbooks, Work packages steps, RECs, CWPs, FWPs, TGIs etc.) required to complete the production operations.</li><li>Performs as Team Member, cooperating with the efforts of other trades during an installation, modification or repair operations.</li><li>Performs component and/or system troubleshooting to diagnose the problem and provide most cost effective recommendation for completing repairs.</li><li>Performs and/or verifies mechanical alignments.</li><li>Ensures control and assumes responsibility for Level-1 material controls in accordance with Epsilon Systems Mission Readiness Group Instructions.</li><li>Performs installation, repair, overhaul or modification in place or in shop to mechanical systems and components (e.g.; Valves, Actuators, Cylinders, Accumulators, Pumps, Launchers etc.).</li><li>Assists with the performance of on-site field service for system grooms and checkouts, minor repairs and system configuration validation.</li><li>Prepares and installs equipment or system alterations (e.g.; TEMPALTs, SHIPALTs, ORDALTs, etc.) IAW the directives (i.e.; instructions, drawings, MILSPECs, etc.).</li><li>Assists in rigging when necessary.</li><li>Ability to work outside of trade.</li></ul>Requirements:<ul><li>High school diploma/equivalent/Apprenticeship Diploma/additional vocational courses or technical school graduate; and/or military and/or civilian experience with marine mechanical systems in a repair department or shipyard</li><li>5 years' experience.</li><li>Has knowledge of the trade qualifications and performs as a level III Outside Machinist.</li><li>Must be able to understand and perform the basic set up, alignment, and operation of various portable tools and hand tools used in the trade.</li><li>Has working knowledge of shipboard mechanical systems (repair/installation practices, procedures, alignments and troubleshooting).</li><li>Must have the ability to read, understand, interpret and work from blueprints, sketches and specifications.</li><li>Must have experience in the disassembly, repair, installation, testing and inspection of ship machinery such as, but not limited to, propelling machinery, pumps, valves, launchers, discharge machinery, ventilation equipment, steering gear, evaporators, heaters, condensers, propulsion plants, torpedo tubes, shutter doors, antennae mast mechanical groups.</li><li>Ability to use such precision measuring instruments as height gauges, depth gauges, calipers, verniers, lay-out tools, tachometers, thermometers, vibration indicators</li><li>Possesses the ability to accurately record readings and measurements as well as complete documentation, repair, and testing of equipment.</li><li>Must have knowledge of rigging equipment and be able to identify damaged and/or worn equipment. Must be able to lead rigging teams in medium to larger rigging tasks.</li><li>Assists in rigging evolutions when necessary.</li><li>Communicates effectively</li><li>Works independently or in a group. Requires no supervision/oversight.</li><li>Ability to do basic math, i.e. add, subtract, divide and multiply.</li><li>Ability to read, write, speak, and comprehend English.</li><li>Ability to obtain and maintain a DoD Secret security clearance.</li><li>Ability to obtain access to military and government installations and private shipyards worldwide.</li><li>Ability to travel.</li><li>Pursuant to the various government contractual requirements, all applicants must be U.S. Citizens</li></ul>Preferred Qualifications<ul><li>Current security clearance</li></ul>ADA Notations:<ul><li>Requires walking, reaching, sitting and concentration in the presence of occasional noise.</li><li>Able to move in narrow and restricted passageways, up/down steep and narrow ladders or stairways, and up and down antenna masts/yardarms (onboard ships).</li><li>Able to lift, carry and move objects up to 50 lbs in weight.</li><li>Must have manual and finger dexterity; able to grasp, manipulate, assemble small objects.</li><li>Able to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.</li><li>Able to perceive and distinguish normal range of colors.</li><li>May be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots.</li></ul> Epsilon Systems Solutions, Inc. and its subsidiaries are proud to be Equal Employment Opportunity and Affirmative Action employers, Minority/Female/Disabled/Veterans. PI244207817

Outside Machinist III

McShea Contracting During our time of growth, we are seeking an experienced Shop Mechanic to work our day shift, Monday-Friday team. $22-$25 per hour dependent upon experience. 
Responsibilities
<ul>
 <li>Service and repair diesel engines, brakes, hydraulics, electrical, mechanical, and air; front and rear suspensions.</li>
 <li>Analyze and tune engines through the use of engine analyzer, ignition analyzer, injector pump tester, and coolant</li>
 <li>Diagnose all failures of equipment, remove and replace parts as necessary, and repair any and all mechanical and electrical issues that arise.</li>
 <li>Repairing and replacing damaged or worn parts on all equipment.</li>
 <li>Operating and inspecting equipment to diagnose defects</li>
 <li>Diagnosing faults or malfunctions to determine required repairs, using engine diagnostic equipment such as computerized test equipment and calibration devices.</li>
 <li>Demonstrate integrity and ethics.</li>
 <li>Performs all necessary vehicle repairs as assigned</li>
 <li>Maintains a safe, clean, productive and efficient work</li>
 <li>Identifies and reports any repairs found to be necessary whether or not previously Indicates any necessary repairs that are above current qualification level.</li>
 <li>Records time spent, parts used, and repairs on the appropriate forms provided as each activity is completed.</li>
 <li>Ensures compliance of work and work area with appropriate state and federal regulations regarding equipment and equipment</li>
</ul>
Requirements
<ul>
 <li>Minimum of 3+ years experience working in a heavy equipment/diesel shop, 5 years preferred</li>
 <li>Extensive experience with engine, electrical and hydraulic repairs</li>
 <li>Effective communication and interpersonal skills. Demonstrated mechanical aptitude and ability.</li>
 <li>Ability to understand and execute verbal and written instructions.</li>
 <li>Must be cooperative and show initiative towards improving skills.</li>
 <li>Ability to work productively with minimal supervision.</li>
 <li>Basic computer skills needed for data entry into maintenance systems</li>
</ul> PI244208209

Diesel Shop Mechanic (Days M-F)

Senior Construction Inspector US-FL-Winter Springs Job ID: 2024-4069 Type: Regular Full-Time # of Openings: 1 Category: Construction Services Winter Springs Overview As a senior construction inspector, you’ll monitor the contractor’s on-site construction activities and inspect materials to ensure compliance with plans, specifications, and other contract documents for excavations, drainage facilities, road surfaces, and structures. You’ll take field measurements of pay items, report the contractor’s daily production rates, and schedule work and inspection phases with the contractor’s superintendent and agency personnel. Providing support to various project procedures, particularly in documentation development for the final estimate package. You`ll mentor and assist in the management and training of other construction inspection staff. The senior construction inspector reports to the project administrator. Responsibilities • Inspect, observe, document, and verify work in progress by the construction contractor to ensure compliance with project schedule, contract documents, and plans. • Utilize engineering inspection practices to perform complex mathematical calculations and measurements of completed work to date.• Maintain inspector's daily report of assigned work activities, contractor labor and equipment, quantity of material received and verified.• Perform on-site material testing and produce as-constructed sketches.• Direct coordination between field efforts and administrative staff to increase, decrease, or modify reporting and monitoring according to project work activities.• Organize and lead field staff meetings to provide updates on project efforts and procedures. • Delegate inspector staff responsibilities and allocate resources to support current and projected project conditions and activities. Qualifications • Bachelor of Science in Civil, Environmental, Chemical, or a related engineering discipline.• Professional Engineer (PE) license.• Minimum ten years of construction inspection experience.• Ability to read and interpret construction plans and specifications.• Obtain any required certifications and pass appropriate qualifications tests for the position in specified time frames.• Must have a valid driver's license with a good driving record.• This field job primarily operates in outdoor work environments that may include exposure to inclement weather, heat, humidity, noise, hazard, atmospheric conditions, and bodies of water, depending on project requirements.• While performing the duties of this job, physical demands of the employee may include frequent talking, hearing, standing, moving, walking, stooping, kneeling, crouching, crawling, reaching, handling, grasping, feeling, balancing, coordination, and occasional sitting or operating a company vehicle. This job may require lifting, carrying, pushing, and pulling up to 35 lbs. PI244184214

Senior Construction Inspector

Construction Inspector US-FL-Winter Springs Job ID: 2024-4068 Type: Regular Full-Time # of Openings: 1 Category: Construction Services Winter Springs Overview As a construction inspector, you’ll monitor the contractor’s on-site construction activities and inspect materials to ensure compliance with plans, specifications, and other contract documents related to excavations, drainage facilities, road surfaces, and structures. You’ll take field measurements of pay items, report the contractor’s daily production rates, and schedule work and inspection phases with the contractor’s superintendent and agency personnel. Provide support to various project procedures, particularly in documentation development for the final estimate package. The construction inspector reports to the project administrator. Responsibilities • Inspect, observe, document, and verify work in progress by the construction contractor to ensure compliance with project schedule, contract documents, and plans.• Utilize engineering inspection practices to perform complex mathematical calculations and measurements of completed work to date.• Maintain inspector's daily report of assigned work activities, contractor labor and equipment, quantity of material received and verified.• Perform on-site material testing and produce as-constructed sketches as required. Qualifications • HS Diploma or equivalent.• Minimum four years of construction inspection experience.• Ability to read and interpret construction plans and specifications.• Obtain any required certifications and pass appropriate qualifications tests for the position in specified time frames.• Must have a valid driver's license with a good driving record.• This field job primarily operates in outdoor work environments that may include exposure to inclement weather, heat, humidity, noise, hazard, atmospheric conditions, and bodies of water, depending on project requirements.• While performing the duties of this job, physical demands of the employee may include frequent talking, hearing, standing, moving, walking, stooping, kneeling, crouching, crawling, reaching, handling, grasping, feeling, balancing, coordination, and occasional sitting or operating a company vehicle. This job may require lifting, carrying, pushing, and pulling up to 35 lbs. PI244184287

Construction Inspector

Systems Application &amp; Technologies Inc Systems Application &amp; Technologies, Inc. is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected Veteran status. Description:
Position Type: Full-Time, Non-ExemptWork Location: Eglin AFB, FL Systems Application &amp; Technologies, Inc. (SA-TECH) is a progressive and established Department of Defense (DoD) contractor specializing in Range operations and maintenance (O&amp;M); weapons testing; facilities management; aerial, ground and seaborne targets O&amp;M; technical, logistics and other engineering support; systems integration; electronics and communications maintenance services; and a growing cybersecurity business. We are highly focused and, among other efforts, currently operate a dozen active test and/or training ranges for the Army, Air Force and Navy. Our 34-year heritage is founded on supporting complex and diverse DoD programs and we've developed a standout reputation for providing the highest quality services, superior workmanship and cost-effective results while achieving complete customer satisfaction. At Eglin Air Force Base, SA-TECH provides Range support services including Marine Operations O&amp;M, O&amp;M and engineering support for all remote-controlled Foreign Military Equipment (FME) land targets and sea targets, as well as O&amp;M for Electronic Warfare (EW) systems and associated range instrumentation systems. We also provide Research, Development, Test and Evaluation (RDT&amp;E) as well as management oversight, design, integration, installation and pre- and post-test operations. SA-TECH conducts concurrent land operations on Eglin Test and Training Range and seaborne operations in the Eglin Gulf Test and Training Range (EGTTR), plus deployed training missions outside of ECTTR along the Texas coastline and in the Key West, FL vicinity, keeping EW, communication and instrumentation systems, and land and marine targets and support vessels operational to meet a demanding mission operations tempo. We are currently seeking an Electronics Technician, Maintenance II - III at our Eglin AFB location near Miramar Beach, FL to (among other duties):<ul><li>Troubleshoot, repair, alignment, and operation concepts for complex electronic equipment.</li><li>Operate and troubleshoot computer controlled instrumentation, as well as analog and digital interface equipment.</li><li>Applicant will utilize operational knowledge of various types of test equipment, including spectrum analyzers, oscilloscopes, signal generators, power meters, and frequency counters. Knowledge of RF components and radar subsystems, including transmitters, receivers, and servo systems.</li><li>Duties will also include interfacing with military and civilian test customers to ensure mission success.</li><li>Other duties may be assigned such as safety, security, PIPR, and TMDE.</li></ul>Key to success in this role will be well-seasoned experience with maintaining, troubleshooting and operating ground-based (and possibly other) military radar systems. Work Conditions:<ul><li>Duties are performed both indoors and outdoors.</li><li>Outdoor duties may be performed in high humidity, and on even or uneven surfaces, which may be dry or wet.</li><li>Must be able to lift 50 lbs. unassisted.</li><li>Job demands will require physical dexterity and flexibility.</li><li>Must be physically able to sit, stand, kneel and climb.</li><li>Must be willing and able to wear company provided personal protective equipment; such as hearing protectors, safety glasses, gloves, etc.</li><li>Must comply with all applicable USAF and SA-TECH safety rules, regulations, and policies.</li><li>Changing work locations, shift changes, and overtime required at times to support operations.</li></ul>

Requirements:
Education/Experience/Skills:<ul><li>Associates degree in electronics field or certificate of completion from an accredited Technical school, or equivalent military technical training, and minimum three years' experience in the listed duties required.</li><li>Well-rounded experience with radar systems.</li><li>A good working knowledge of troubleshooting, repair, alignment, and operation concepts for complex electronic equipment is desirable.</li><li>Must have an understanding of computer controlled instrumentation, as well as analog and digital interface equipment.</li><li>Possess a good operational knowledge of various types of test equipment, including spectrum analyzers, oscilloscopes, signal generators, power meters, and frequency counters.</li><li>Knowledge of RF components and ground based radar subsystems, including transmitters, receivers, and servo systems is highly desirable.</li><li>Current Driver's License required; must be able to be insured through company's vehicle insurance policy while driving work/government/rental vehicles during working hours, and for the duration of employment.</li><li>U.S. Citizenship required and you must be able to obtain a U.S. DoD Security Secret Clearance prior to hire date and maintain a Secret clearance throughout employment.</li><li>All candidates will be required to pass background screening to include SSN, Driver Record, and Criminal Background Investigation.</li></ul>_____________________________________________________________________________________ Working at SA-TECH:As a highly regarded DoD employer, SA-TECH recognizes that our success is indicative of our team members' hard work and dedication towards a common goal… Supporting our Warfighters. Along with unparalleled stability, we have the ingredients for superior performance with a servant leadership mentality that provides an affirmation of purpose and value in a team-oriented positive work environment. As such, we provide a sense of family, competitive pay and employee benefits, along with a strong commitment to the professional development of our workforce and for providing broad career opportunities throughout the United States. SA-TECH provides employees with:<ul><li>Employee Recognition</li><li>Above-Average Compensation</li><li>Competitive Employee Benefits</li><li>Continuous Training and Professional Development</li><li>Ample Career Advancement Opportunities</li></ul>Highlights of SA-TECH's employee benefits include:<ul><li>Medical plan with excellent prescription coverage</li><li>Dental plan with orthodontics for children</li><li>Vision plan</li><li>401(k) retirement plan</li><li>Life, accidental death &amp; dismemberment insurance</li><li>Sick leave</li><li>Flexible PTO options</li></ul>SA-TECH is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected Veteran status. All responses will be handled with strict confidentiality. PI244152943

36 Construction/Facilities/Maintenance Jobs in Florida