field_job_employment_type

field_job_occupational_field_parents_all

job_organization_name

POSITION SUMMARYThe position is responsible for engine and powertrain development which covers a wide range of duties from the creation of test plans, test design, setup (including test stand construction, instrumentation, and controls), test execution, data processing, analysis, and reporting. Primary development activities will be related to operating and calibration of diesel and spark ignited internal combustion engines along with engine subsystems such as cooling, lubrication and fuel delivery, powertrain integration and hybrid systems. Other duties include component design, supporting bid and proposals, and program status reporting.ESSENTIAL FUNCTIONS<ul><li>Work with Engineering to develop engine test plan including: Instrumentation list, Engine support systems, Test lab controls, Safety and Wire diagrams, electrical harness fabrication and soldering</li><li>Configure Labview software/National Instruments hardware for data acquisition and controls</li><li>Interface with engine controller and CAN bus messaging</li><li>Write code for system controls including ECU and lab systems</li><li>Maintain lab sensors, cabling, connector selection, instruments, and calibration data</li><li>Maintain and configure lab-based support systems including heat exchangers, high- and low-pressure fuel supply, lubrication circuits, dynamometer hardware</li><li>Configure test stands and prep engine/powertrains for testing</li><li>Conduct engine and hardware tests including motoring, performance, durability, flow bench</li><li>Conduct engine and powertrain calibration and controls work. </li><li>Maintain lab logs and test data</li><li>Create Excel templates for test data analysis and presentation</li><li>Provide clear and concise technical writing for test reports, proposals, and presentations</li><li>Communicate effectively with team members</li><li>Support BE’s values, principles, vision, and mission</li><li>Other duties as may be assigned</li></ul>MINIMUM QUALIFICATIONS<ul><li>Bachelor’s degree Mechanical or Electrical Engineering with courses in Combustion Engines</li><li>Minimum of 3 years’ experience in engine or powertrain development</li><li>Proficient in Labview software</li><li>Experience with CAN bus messaging</li><li>Proficient with Coding</li><li>Strong electrical knowledge pertaining to noise, signal, and frequency</li><li>Ability to read and draft wire diagrams</li><li>Hands-on/mechanically oriented</li><li>Must be able to support the Baker culture with a focus on teamwork and a commitment to service</li><li>Strong oral and written communication skills</li><li>Proficient in Microsoft office suites including; Word, Excel, PowerPoint, and Adobe</li><li>Proven ability to handle confidential information with discretion</li><li>Demonstrated ability to achieve high performance goals and meet deadlines in a fast-paced environment</li><li>Ability to pass a background investigation, including but not limited to nationwide criminal record search, and other relevant background information deemed necessary by BE.</li><li>US Citizenship required (ITAR compliance)</li></ul>PREFERRED QUALIFICATIONS<ul><li>Experience with diesel engine development </li><li>Knowledge of diesel fuel injection systems</li><li>Knowledge of turbocharger and superchargers</li><li>Experience with MoTeC ECU’s and MoTeC M1 Build software </li><li>Experience with Hybrid or generator systems</li></ul> COMMUNICATION<ul><li>Effectively and regularly communicate with the BE President and Engineering Team</li><li>Support BE’s values, principles, vision, and mission</li></ul> PHYSICAL REQUIREMENTS<ul><li>Lift up to 50lb occasionally</li><li>Stand/walk up to 8 hours per day </li><li>Bend and Twist occasionally</li><li>Reach/work above shoulders occasionally</li><li>Fine manipulations frequently to occasionally</li><li>Gross manipulation frequently to occasionally</li><li>Push/pull frequently to occasionally</li><li>Sit a desk workstation for up to 8 hours per day</li></ul>WORK ENVIRONMENT Climate-controlled laboratoryOffice environmentTRAVELThis position may require travel up to 5% of the time POSITION TYPEThis is a full-time exempt position.RELOCATIONRelocation expenses are not provided. HIRING PREFERENCEVeteran Hiring &amp; Native American Preferences will be applied in accordance with BE policy Baker Engineering is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class.
 
 PI243795948

Powertrain Development Engineer

POSITION SUMMARYThe Design Engineer is responsible for the development of parts, assemblies and detailed drawings using CAD design software as well as supporting the design work through the manufacturing, building, and testing phases.ESSENTIAL FUNCTIONS <ul><li>Perform CAD Design to customer specifications utilizing PTC Creo software (multiple modules)</li><li>Conduct Finite Element Analysis</li><li>Development of parts, assemblies, and detailed drawings</li><li>Conduct engineering analysis of components and dynamic systems</li><li>Support part and engine testing</li><li>Write proposals and reports</li><li>Other duties as requested by management</li></ul>MINIMUM QUALIFICATIONS<ul><li>Bachelor’s degree in Mechanical Engineering</li><li>Design/CAD software experience</li><li>Mechanically inclined</li><li>Knowledge of hand tools</li><li>Critical thinking skills</li><li>Strong attention to detail</li><li>Proficient in Microsoft office suites including; Word, Excel, PowerPoint, and Adobe</li><li>Must be able to support the Baker culture with a focus on teamwork and a commitment to service</li><li>Time management and organizational skills</li><li>User level knowledge of ASME Y14.5 standard for geometrical dimensioning and tolerancing</li><li>Ability to communicate and collaborate with team members</li><li>Good oral and written communications skills</li><li>Proven ability to handle confidential information with discretion</li><li>Ability to pass a background investigation, including but not limited to nationwide criminal record search, and other relevant background information deemed necessary by BE.</li><li>US Citizen/ ITAR compliant</li></ul>PREFERRED QUALIFICATIONS<ul><li>Engine test laboratory experience (instrumentation, set-up, and operation) preferred</li><li>Proficient using PTC Creo software as evidenced by at least 5,000 hours of professional experience</li><li>Experience with design for manufacturing</li></ul>PHYSICAL REQUIREMENTS<ul><li>Lift up to 50lb rarely</li><li>Stand/walk up to 8 hours per day </li><li>Bend occasionally</li><li>Reach/work above shoulders occasionally</li><li>Twist rarely</li><li>Fine manipulations frequently to occasionally</li><li>Gross manipulation frequently to occasionally</li><li>Push/pull frequently to occasionally</li><li>Sit a desk workstation for up to 8 hours per day</li></ul>WORK ENVIRONMENT Office environment Climate controlled shopTRAVELThis position may require travel up to 5% of the timePOSITION TYPEThis is a full-time, exempt position RELOCATIONRelocation expenses are not providedHIRING PREFERENCEVeteran Hiring &amp; Native American Preferences will be applied in accordance with BE policy Baker Engineering is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity Employer making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. Minorities, females, veterans, individuals with disabilities are encouraged to apply.
 
 PI243795762

Design Engineer

Curious about a career with NorthPoint?
NorthPoint is a real estate developer that has grown through combining an entrepreneurial spirit and empowerment of its team members. Building maintenance is responsible for maintaining the physical integrity of the property/asset at all times. This involves insuring a safe and secure environment for tenants, visitors and staff. It is the duty of the Building Maintenance Engineer to anticipate, identify and correct any and all problems involving the property/asset and to implement procedures that will prevent such problems. NorthPoint provides an inclusive environment that cultivates collaboration and mentorship. Our core values set the foundation of our culture and guide us in every business decision.
We truly believe, and I'm convinced, we have some pretty incredible assets. But those assets have all come from our people. - Nathaniel Hagedorn | CEO.
How We Put You First:
At NorthPoint Development we ask a lot of our employees, which is why we give so much in return. In addition to your competitive salary, we offer market-leading benefits and perks:
<ul>
 <li>A selection of comprehensive medical, dental, and vision plans</li>
 <li>401k with 100% match up to 6%, immediately vested upon enrollment</li>
 <li>Scholarships and paid professional development</li>
 <li>Robust Reimbursement Programs: Dependent Care, Tuition, Wellness Spending Account, Cellphone</li>
 <li>Mental Health Reimbursement</li>
 <li>Childcare Reimbursement</li>
 <li>$2,000 annual HRA and HSA contribution</li>
 <li>Parental Paid Leave</li>
 <li>Flexible Spending Account Living Generously program with 100% charitable contribution match</li>
</ul>
What You'll Do
<ul>
 <li>Maintain and repair all aspects of commercial and industrial real estate. This is a roving position, and you will be responsible for multiple industrial buildings. Business mileage will be reimbursed.</li>
 <li>Troubleshoot and repair electrical, plumbing, HVAC, drywall, painting, fire sprinkler systems, building controls, doors, windows, caulking and any other property issue.</li>
 <li>Read, understand and utilize wiring diagrams, schematics, drawings, and blueprints.</li>
 <li>HVAC troubleshooting including RTU's, MAU's, VAV's, etc.</li>
 <li>Plumbing repairs and troubleshooting including water closets, urinals, faucets, pumps, pipes and valves.</li>
 <li>Perform preventative maintenance tasks on physical structures, plumbing, HVAC, fire sprinkler and electrical systems.</li>
 <li>Work with subcontractors and vendors as needed.</li>
 <li>Respond to and complete service requests.</li>
 <li>Maintain thorough knowledge of pertinent laws and EPA and OSHA regulations governing property storage and management of hazardous materials, including solvents, flammables, caustics, and refrigerants.</li>
 <li>Must be aware of the physical condition of the property and immediately correct unsafe conditions.</li>
 <li>Maintains accurate records regarding preventive maintenance, service requests (received and completed), expenditures, work-in-progress, etc.</li>
 <li>Schedules and performs minor and routine maintenance on all appropriate equipment on a regular basis.</li>
 <li>Inspects and maintains all tools in excellent condition.</li>
 <li>Identifies all utility meter cut-offs, fixture cut-offs, sewer cleanouts and prepares maps indicating same.</li>
 <li>Performs work area clean-up and safety related duties.</li>
 <li>Assists in keeping grounds neat and free of litter. Rakes, sweeps, shovels as circumstances warrant.</li>
 <li>Performs any additional duties assigned by Property Manager or Supervisor.</li>
 <li>Ability to climb and work from ladders, man hoists or lifts, and the ability to repeatedly lift and carry heavy loads (up to 50 lbs.)</li>
 <li>Ability to perform after hour on call duties as required.</li>
 <li>Assist Project Managers, Property Managers and Leasing Agents with TI process and bids.</li>
 <li>Reports all major repairs and requisitions to Property Manager prior to any expenditure of funds.</li>
 <li>Obtains two to three bids for repairs and replacements exceeding $1,000.00.</li>
 <li>Manage all routine subcontract work for contract performance and quality. For example, manage snow removal, landscaping (ensuring fertilizer, seeding, mowing, irrigation schedules are maintained and appropriate).</li>
 <li>Conduct monthly property walk and address any issues identified by repairing and/or obtaining bids for repairs or replacements.</li>
</ul>
Are you passionate about pushing the limits? Are you looking for the freedom to forge your future? If so, we want to talk to you!
Who You Are
<ul>
 <li>Ideal candidate will have commercial building maintenance experience.</li>
 <li>High school diploma, GED or related experience and/or training.</li>
 <li>EPA 608 certification.</li>
 <li>Tools and transportation.</li>
 <li>Demonstration of strong technical competence and commercial awareness are necessary.</li>
 <li>Strong interpersonal, verbal and written communication skills.</li>
 <li>Energetic, resourceful and hands-on individual with a strong customer service orientation.</li>
 <li>Attention to detail and great organizational skills.</li>
 <li>Able to approach problems both logically and creatively.</li>
 <li>Demonstrate a confident &amp; positive approach when interacting with all team members &amp; visitors.</li>
 <li>Able to work collaboratively as a team &amp; independently.</li>
 <li>Strong organizational and multi-tasking abilities.</li>
</ul>
We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. PI244207698

Building Maintenance Engineer

Roush Title Powertrain Test Engineer II Location Dearborn, MI Category Engineering &amp; Design Hiring Type Full Time We work alongside the best and brightest to do incredibly cool things you wouldn’t believe. At Roush, you’re part of building the future. Are you someone that has a passion for providing innovated solutions to complex challenges? Do you want to work someplace where creativity and new ideas are encouraged? If so, then keep reading.We fuse technology and engineering to provide product development solutions to customers in a diverse range of industries. Widely recognized for providing engineering, testing, prototype, and manufacturing services to the transportation industry, Roush also provides significant support to the aerospace, defense and theme park industries. With over 2,400 employees in facilities throughout the United States, Europe, Asia, and South America, our unique combination of creativity and tenacity activates big ideas on a global stage. We offer a full array of benefits to our full-time employees, including medical, dental, vision, life insurance, earned sick time, STD, LTD, 401K, tuition reimbursement, paid vacation, and paid holidays.Job SummaryThe Powertrain Test Engineer II will support the customer in developing and executing powertrain and vehicle testing. The role will ensure testing is carried out according to approved procedures and customer requirements. The Powertrain Test Engineer II will perform independent project tasks and collaborate with customers and team members. This position is located in Dearborn, MI.As a Powertrain Test Engineer II, you will:<ul><li>Review and understand engineering test plans for powertrain systems and automotive laboratory test setups</li><li>Create computer-based tests and protocols for powertrain testing. Direct installation of required sensors and equipment</li><li>Interpret data and provide feedback and conclusions. Compile test results and prepare reports consisting of data and analysis for the customer</li><li>Conduct regular inspection of the unity under test and the testing data to ensure the test is proceeding as expected and to identify any irregularities that may prevent or interfere with future testing. Troubleshoot unit under test and facility issues</li><li>Lead project management and implementation of testing efficiency improvements</li><li>Assist in the training of new Engineers and Technicians</li></ul>To be considered a Powertrain Test Engineer II, you will need:<ul><li>Bachelor of Science in Mechanical Engineering, Mechanical Engineering Technology, or Automotive Engineering, Automotive Engineering Technology, or equivalent</li><li>Minimum of 2 years of experience in the automotive or powertrain fields in engine design, calibration, repair, build up, production, or similar, or as a Test Engineer in Noise, Vibration, and Harshness (NVH), durability, chassis, road load, or similar</li><li>Experience in data organization, plotting, comparison, and analysis</li><li>Good understanding of internal combustion engines both spark and compression ignition</li><li>Knowledge of fluid flow and heat transfer, systems, and components</li><li>Knowledge of basic programming and electronics troubleshooting</li><li>Proficient with Microsoft Office Suite, specifically Word and Excel</li></ul>A successful candidate may also have:<ul><li>Experience with engine diagnostics and repair</li><li>Experience as a powertrain or chassis dyno test engineer</li><li>Basic proficiency in one or more programming languages (e.g. Visual Basic, MATLAB, Python, C++, etc.)</li><li>Familiarity with engine calibration or communication</li><li>Ability to use scientific measurement equipment (transducers, strain gauges, accelerometers, emission benches, etc.)</li><li>Good skills in reading and interpreting engineering designs or assembly manuals</li></ul>If you share our passion for providing innovative solutions to complex challenges, we want you on our team. Please visit our careers page and apply by clicking on this link: <a href="https://jobs.roush.com/us/en" target="_blank">https://jobs.roush.com/us/en</a>Visit our website: <a href="http://www.roush.com" target="_blank">www.roush.com</a>Like us on Facebook: <a href="http://www.facebook.com/RoushCareers" target="_blank">www.facebook.com/RoushCareers</a>Roush is an EO employer – Veterans/Disabled and other protected categoriesIf you need a reasonable accommodation for our employment application process due to disability, please contact Roush Talent Acquisition at (734) 779-7087. PI243973693

Powertrain Test Engineer II

Leprino Foods Position Title: CAD Engineering Technician Shift Type: Full Time Location: Allendale, MI, US, 49401 Posted Date: Jun 27, 2024 Requisition ID: 29967 No of Openings: 1 Job Functions: Engineering Description: Short &amp; Sweet: Performs a wide variety of CAD work for production facilities and general offices including equipment, building, and piping layouts and schematics to assist Allendale Plant Engineering staff as needed.Schedule: 1st Shift, Monday through Friday (8:00 AM - 4:30 PM)*No weekend's or holiday's requiredJob Description:1. Performs design and AutoCad work for potential or new projects by gathering information on objectives; traveling to field locations as needed to measure space, existing equipment, etc., and developing alternative CAD drawings, calculations, and preliminary costs for review by technical services and plant personnel. 2. Assist in modifying equipment or building design by working from broad concepts and filling in details necessary for actual implementation.3. Coordinates with suppliers of equipment once projects are assigned to resolve questions regarding standards, elevations, transferring mechanisms, etc.4. Develops and maintains instrumentation, controls, PLC schematics and equipment drawings.5. Develop layout designs, etc. that contribute to a safe work environment through input of candidate's customs and team approach to detail.Minimum Requirements:1. Must be at least 18 years of age.2. Must be able to support 24/7/365 operation.3. Must be able to communicate effectively verbally and in writing.4. Associates Degree in computer aided design, drafting, or other related field.5. 1-3 years of experience working in manufacturing environment.6. Training or experience in mechanical and electrical techniques7. Must be able to read and interpret CAD drawings and utilize computer programs to create drawings to scale.8. Must be capable of creating 3D drawings. Leprino Foods Company utilizes the services of Psychemedics to perform our Hair Follicle Drug Testing. Additional information about this process can be obtained at <a>www.psychemedics.com</a> Leprino Foods requires all individuals to wear the appropriate Personal Protection Equipment (PPE) as required by the role and location. Leprino Foods Company supports a drug-free workplace and is an EEO/Affirmative Action Employer – M/F/Disability/Veteran Nearest Major Market: Grand Rapids PI243032794

CAD Engineering Technician

Mission:BLDI’s staff of engineers, geologists, scientists and business professionals have been focused on providing high quality, cost-effective, and timely environmental services in Michigan, Ohio, Indiana, Illinois, and throughout the Midwest. BLDI is part of a portfolio of companies managed by Waséyabek Development Company, LLC, a 100% Tribally owned economic development firm focused on income diversification on behalf of NHBP that reaches beyond gaming is a well-funded, experienced small business, with substantial liquid assets and experience in federal contracting. Position Summary:BLDI is seeking a Environmental Scientist/Environmental Engineering Technician to join our busy team in Grand Rapids, Michigan. The ideal candidate will assist in conducting a variety of environmental due diligence reports, including but not limited to, Phase I and II Environmental Site Assessments, Baseline Environmental Assessments, and Due Care Plans.The Environmental Scientist/Environmental Engineering Technician will:<ul><li>Collect data and document field conditions for our remediation sites. This includes: preparation and cleaning of equipment, operation of field sampling pumps and monitoring instruments, collection of soil, groundwater and soil gas samples, surveying, logging of soil borings, groundwater monitoring well installations, collection of field results and monitoring, documentation of field event, preparation of samples for laboratory pick-up.</li><li>Participate in a predominance of field work with out-of-town travel and overnight stays. </li><li>Develop tables, figures, and a variety of reports/documents for our remediation department.</li><li>Follow company safety standards, participate in safety training, and prepare and implement site safety plans.</li></ul><h1>Qualifications:</h1><ul><li>Bachelor of Science degree in Environmental Science, Environmental Geology, or a related field from an accredited institution. </li><li>0 to 3 years’ experience in a related field. </li><li>OSHA 40-hour HAZWOPER preferred but not required. </li><li>Proficiency in Microsoft word, excel, and outlook. </li><li>Excellent communication skills, both written and orally, with project managers, clients, and other staff. </li><li>Strong problem-solving skills and ability to multi-task.</li><li>Ability to meet deadlines and handle multiple projects at the same time</li><li>Ability to lift and /or move up to 50 pounds.</li><li>Ability to pass an extensive background investigation and pre-employment drug screen, including but not limited to personal and professional financial history, nationwide criminal record search, motor vehicle records, credit check and other relevant background information deemed necessary by WDC.</li></ul>Travel Requirements:<ul><li>Much of the work is outside the Grand Rapids and requires multiple days per week with overnight stays in hotels in southeast Michigan. Related expenses, including hotel and meals, are covered by BLDI.</li></ul> Native American &amp; Veteran Hiring Preferences will be applied in accordance with WDC policy. Waséyabek Development Company is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity Employer making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. 
 
 PI243964145

Environmental Engineering Technician I

Roush Title Emissions Certification Engineer Location Livonia, MI Category Engineering &amp; Design Hiring Type Full Time We work alongside the best and brightest to do incredibly cool things you wouldn’t believe. At Roush, you’re part of building the future. Are you someone that has a passion for providing innovative solutions to complex challenges? Do you want to work someplace where creativity and new ideas are encouraged? If so, then keep reading.We fuse technology and engineering to provide product development solutions to customers in a diverse range of industries. Widely recognized for providing engineering, testing, prototype, and manufacturing services to the transportation industry, Roush also provides significant support to the aerospace, defense and theme park industries. With over 2,400 employees in facilities throughout the United States, Europe, Asia, and South America, our unique combination of creativity and tenacity activates big ideas on a global stage. We offer a full array of benefits to our full-time employees, including medical, dental, vision, life insurance, earned sick time, STD, LTD, 401K, tuition reimbursement, paid vacation, and paid holidays.The Emissions Certification Engineer will be responsible for researching current internal combustion engine, electric vehicle and heavy-duty engine emissions regulations, processing of data and the creation and submission of required engine emission and vehicle compliance applications to regulatory agencies.As an Emissions Certification Engineer, you will:<ul><li>Prepare and submit emissions certification applications in the agency’s electronic filing systems</li><li>Provide powertrain development teams regulatory targets, clear test procedures and guidance through thorough research of vehicle and engine emissions regulations</li><li>Evaluate Environmental Protection Agency (EPA) and California Air Resources Board (CARB) regulations for applicability to our customer’s future vehicles and engines</li><li>Stay current with changes in the regulatory climate and proposed future rule making trends</li><li>Evaluate emissions test data against the relevant EPA and CARB regulations</li><li>Prepare concise technical reports and review with our customers and the regulators</li></ul>To be considered as an Emissions Certification Engineer, you will need:<ul><li>Bachelor’s degree in a related technical field.</li><li>Minimum of 2 years of experience in preparing and or submitting EPA and CARB emissions certification applications</li><li>Knowledge of engine dynamometer and /or vehicle chassis dynamometer testing</li><li>Knowledge of emission controls and On-Board Diagnostic 2 (OBD2) systems and regulations</li><li>Knowledge of engine and/or vehicle calibration</li><li>Expert knowledge of EPA and CARB regulations and electronic application databases</li><li>Knowledge of typical emissions related engineering specification terminology</li><li>Excellent written and verbal communication skills</li><li>Ability to work independently, handle multiple assignments and meet deadlines</li><li>Ability to use Microsoft Office and Adobe software</li></ul>A successful candidate may also have:<ul><li>Bachelor’s degree in a related engineering field</li><li>Ability to navigate the Code of Federal Regulations (CFR) and the California code of Regulations (CCR)</li><li>Knowledge of Project Management strategies, terminology and practices</li></ul>If you share our passion for providing innovative solutions to complex challenges, we want you on our team. Please visit our careers page and apply by clicking on this link: <a href="https://jobs.roush.com/us/en/" target="_blank">https://jobs.roush.com/us/en</a>/Visit our website: <a href="http://www.roush.com" target="_blank">www.roush.com</a>Like us on Facebook: <a href="http://www.facebook.com/RoushCareers" target="_blank">www.facebook.com/RoushCareers</a>Roush is an EO employer – Veterans/Disabled and other protected categoriesIf you need a reasonable accommodation for our employment application process due to disability, please contact Roush Talent Acquisition at (734) 779-7087. PI243916010

Emissions Certification Engineer

WORK LOCATION: Ann Arbor, MISALARY RANGE: $33 - $38FLSA STATUS: Non-Exempt SUMMARYThe Quality Engineer is an experienced level position requiring a minimum of 3 years in one or more of the following areas: Configuration Management, Supplier Management, Audits, Inspection techniques (non-destructive, electronics, mechanical), or Manufacturing processes. Responsibilities include, designing quality standards, inspecting materials, equipment, processes, and products, developing quality control systems, and determining corrective actions.RESPONSIBILITIESThe following job functions are a basic requirement but are not limited to and may be assigned other duties. <ul><li>Performs inspections and sets quality assurance testing models for analysis of raw materials, materials in process, and finished products</li><li>Develops &amp; Implements quality control policies and evaluates production limitations</li><li>Developing and implementing new or revised quality and control standards.</li><li>Inspecting and testing materials, equipment, processes, and products to ensure quality specifications are met.</li><li>Coordinates &amp; assists with internal and external audits acting as primary point of contact</li><li>Participates in Root Cause and Corrective Action process through full life-cycle</li><li>Supports the RMA process</li><li>In conjunction with the Quality Manager collaborates with operations managers to develop and implement controls and improvements.</li><li>Ensuring that workflows, processes, and products comply with safety regulations.</li><li>Investigating and troubleshooting product or production issues.</li><li>Implements and monitors corrective actions, solutions, and improvements</li><li>Works collaboratively &amp; in conjunction with the larger function</li></ul>REQUIRED QUALIFICATIONSThe following are a non-exhaustive list of qualifications for the position:<ul><li>Degree in Quality, Industrial, Manufacturing, 7+ years of progressive related experience in manufacturing.</li><li>3+ years in progressive QE position</li><li>Previous responsibility with supporting design, set-up and implementation of a QMS System</li><li>Understanding and experience in aerospace standards AS9100 &amp;/or ISO-9001, and its general practices.</li><li>Familiarity with calibration processes and documentation.</li><li>Excellent internal and external Customer interface skills.</li><li>Demonstrated collaboration skills &amp; ability to get things done through influence</li><li>Proven ability to lead projects that are complex in nature</li></ul>PREFERRED QUALIFICATIONS <ul><li>ASQ certification (preferred) </li><li>J-STD-001, IPC/WHMA-A-620, IPC-A-610 certifications (preferred)</li><li>Working knowledge of GD&amp;T (preferred)</li><li>Working knowledge of ESD requirements and practices. (preferred)</li><li>Electrical and electronic inspection processes. (preferred)</li><li>Working knowledge of GSE systems and general associated equipment. (preferred)</li></ul>EDGE AUTONOMY BENEFITS <ul><li>Matching 401(k)</li><li>Paid PTO</li><li>Paid holidays</li><li>Medical, vision, and dental insurance</li><li>Group Short-Term &amp; Long-Term Disability</li><li>HSA and FSA Options</li><li>Critical Care Plan</li><li>Accident Care Plan</li></ul>Hiring RequirementsIf an offer of employment offer is extended, applicant must have the ability to pass a background check and the ability to be insured by the Companys Auto-policy. An Offer of Employment is contingent upon the results.Clearance RequirementsThis position may require access to information that is subject to compliance with the International Traffic Arms Regulations (ITAR) and/or the Export Administration Regulations (EAR). To comply with the requirements of the ITAR and/or the EAR, applicants will be asked to provide specific documentation to verify a US persons status.Edge Autonomy is an Equal Opportunity EmployerAll qualified applicants will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. Edge Autonomy is committed to providing access, equal opportunityand reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact <a href="mailto:jobs@edgeautonomy.io" target="_blank">jobs@edgeautonomy.io</a>Continued employment remains on an At-Will basis. PI243474338

Quality Engineering Specialist

Roush Title Powertrain Test Engineer I Location Dearborn, MI Category Engineering &amp; Design Hiring Type Full Time We work alongside the best and brightest to do incredibly cool things you wouldn’t believe. At Roush, you’re part of building the future. Are you someone that has a passion for providing innovated solutions to complex challenges? Do you want to work someplace where creativity and new ideas are encouraged? If so, then keep reading.We fuse technology and engineering to provide product development solutions to customers in a diverse range of industries. Widely recognized for providing engineering, testing, prototype, and manufacturing services to the transportation industry, Roush also provides significant support to the aerospace, defense and theme park industries. With over 2,400 employees in facilities throughout the United States, Europe, Asia, and South America, our unique combination of creativity and tenacity activates big ideas on a global stage. We offer a full array of benefits to our full-time employees, including medical, dental, vision, life insurance, earned sick time, STD, LTD, 401K, tuition reimbursement, paid vacation, and paid holidays.Job SummaryThe Powertrain Test Engineer I will support the customer in developing and executing powertrain and vehicle testing. The role will ensure testing is carried out according to approved procedures and customer requirements. The Powertrain Test Engineer I will be mentored and supported by team members on project work and customer interactions. This position is located in Dearborn, MI.As a Powertrain Test Engineer I, you will:<ul><li>Review and understand engineering test plans for powertrain systems and automotive laboratory test setups</li><li>Create computer-based tests and protocols for powertrain testing. Direct installation of required sensors and equipment</li><li>Interpret data and provide feedback and conclusions. Compile test results and prepare reports consisting of data and analysis for the customer</li><li>Conduct regular inspection of the unity under test and the testing data to ensure the test is proceeding as expected and to identify any irregularities that may prevent or interfere with future testing. Troubleshoot unit under test and facility issues</li><li>Assist with project management and implementation of testing efficiency improvements</li></ul>To be considered a Powertrain Test Engineer I, you will need:<ul><li>Bachelor of Science in Mechanical Engineering, Mechanical Engineering Technology, or Automotive Engineering, Automotive Engineering Technology, or equivalent</li><li>No previous experience required</li><li>Basic skills in data organization, plotting, comparison, and analysis</li><li>Working understanding of internal combustion engines both spark and compression ignition</li><li>Knowledge of fluid flow and heat transfer, systems, and components</li><li>Knowledge of basic programming and electronics troubleshooting</li><li>Proficient with Microsoft Office Suite, specifically Word and Excel</li></ul>A successful candidate may also have:<ul><li>Experience with engine diagnostics and repair</li><li>Basic proficiency in one or more programming languages (e.g. Visual Basic, MATLAB, Python, C++, etc.)</li><li>Familiarity with engine calibration or communication</li><li>Ability to use scientific measurement equipment (transducers, strain gauges, accelerometers, emission benches,</li><li>etc.)</li><li>Good skills in reading and interpreting engineering designs or assembly manuals</li></ul>If you share our passion for providing innovative solutions to complex challenges, we want you on our team. Please visit our careers page and apply by clicking on this link: <a href="https://jobs.roush.com/us/en" target="_blank">https://jobs.roush.com/us/en</a>Visit our website: <a href="http://www.roush.com" target="_blank">www.roush.com</a>Like us on Facebook: <a href="http://www.facebook.com/RoushCareers" target="_blank">www.facebook.com/RoushCareers</a>Roush is an EO employer – Veterans/Disabled and other protected categoriesIf you need a reasonable accommodation for our employment application process due to disability, please contact Roush Talent Acquisition at (734) 779-7087. PI243444428

Powertrain Test Engineer I

Roush Title Hybrid Systems Chief Engineer Location Allen Park, MI Category Engineering &amp; Design Hiring Type Full Time We work alongside the best and brightest to do incredibly cool things you wouldn't believe. At Roush, you're part of building the future. Are you someone that has a passion for providing innovated solutions to complex challenges? Do you want to work someplace where creativity and new ideas are encouraged? If so, then keep reading.We fuse technology and engineering to provide product development solutions to customers in a diverse range of industries. Widely recognized for providing engineering, testing, prototype, and manufacturing services to the transportation industry, Roush also provides significant support to the aerospace, defense and theme park industries. With over 2,400 employees in facilities throughout the United States, Europe, Asia, and South America, our unique combination of creativity and tenacity activates big ideas on a global stage.The Hybrid Systems Chief Engineer will serve as the lead for technical and commercial development relating to electrified powertrains in transportation and other applications. Duties include developing and supporting commercial strategies to identify new business opportunities for Roush products and services; determining technical skill requirements and assisting in recruiting and training accordingly; identifying key capital requirements and assisting in developing business cases for investments as appropriate; leading efforts to optimize system design, balancing cost, weight, performance, environmental, and quality objectives; developing and fostering relationships within supply and customer base; participating in peer design reviews relating to hybridized programs. They will be responsible for engaging and managing various internal and external activities, including engineering, simulation, physical testing, prototyping, manufacturing, etc. to ensure system function is maximized and requirements are achieved. This position is located in Allen Park, MI. Essential Duties and Responsibilities:<ul><li>Develop and support implementation of commercial strategies to identify new business opportunities in areas of hybrid/electrified powertrain systems. </li><li>Assess Roush internal capabilities and capacity, both in terms of personnel and tools, and identify areas for potential improvement. Develop recommendations for addressing and participating in implementation, including recruiting and training staff as well as making proposals where appropriate for targeted investments in tools.</li><li>Provide leadership in developing and implementing processes for optimizing hybrid system performance, including working across multiple departments and business units.</li><li>Develop and implement a robust design review process relating to hybrid powertrain systems, focusing on ensuring system level targets relating to cost, quality, performance, weight, quality, etc. are achieved. Provide guidance and support to program engineers in leading these reviews, documenting the results, and implementing action plans.</li><li>Assist in developing and implementing robust requirements for hybrid powertrain systems using Roush JAMA requirements management system.</li><li>Responsibility for leading hybrid system level DFMEA, and supporting related PFMEAs, to be used throughout the company</li></ul>Minimum Qualifications:<ul><li>Bachelor’s degree in systems, electrical, mechanical or computer engineering.</li><li>Minimum of 10 years relevant experience in propulsion system engineering, with a minimum 4 years in Hybrid electric vehicle propulsion systems (type P1-P4) and minimum 7 years of electric vehicle propulsion systems (any type).Demonstrated systems engineering experience overseeing simple or complex technical projects.</li><li>Proven experience with financial management; this can be in the areas of BOM cost management, project cost management, department cost management, P&amp;L, etc.</li><li>Proven experience in directly communicating with senior executives relating to product and/or business planning.</li><li>U.S. Citizen for International Traffic in Arms Regulations (ITAR) compliance.</li><li>Analytical skills and ability to direct and consult on technical analyses.</li><li>Excellent communication skills including written, verbal, and presentation.</li><li>Extensive knowledge of systems engineering practices.</li></ul>Preferred Skills:<ul><li>Master’s or PhD in applied engineering, systems engineering, or other system-level discipline.</li><li>Published research (SAE papers or other recognized technical journals), patents, or other recognized contributions to the area of hybridized powertrains.</li></ul><ul><li>Proven experience in complex multi-variable analysis, ideally relating to hybrid powertrain applications.</li><li>Understanding of business processes: creation, refinement, and gap analyses.</li><li>Proven history of developing and mentoring skills development within the organization.</li></ul>Our full-time benefits include: medical, dental, vision, life insurance, earned sick time, STD, LTD, 401K, tuition reimbursement, paid vacation, paid holidays, and <a href="https://www.roush.com/join-us/#life-at-roush" target="_blank">more</a>.If you share our passion for providing innovative solutions to complex challenges, we want you on our team.Please visit our careers page and apply by clicking on this link: <a href="https://jobs.roush.com/us/en/" target="_blank">https://jobs.roush.com/us/en</a>/Visit our website: <a href="https://jobs.roush.com/%22www.roush.com/%22" target="_blank">www.roush.com</a>Like us on Facebook: <a href="https://jobs.roush.com/%22www.facebook.com/RoushCareers/%22" target="_blank">www.facebook.com/RoushCareers</a>Roush is an EO employer – Veterans/Disabled and other protected categoriesIf you need a reasonable accommodation for our employment application process due to disability, please contact Roush Talent Acquisition at 734-779-7087. PI243138301

11 Engineering Jobs in Michigan